Set Low Latency; Set Bit Depth - NovaStar MX Series User Manual


Video Source Format: Set the format of the 3D video source. Set the format to SBS, TAB or Frame SEQ
according to the format of the accessed video source.

Right Eye Start: Set the start position of the right eye image. When the video source format is SBS or TAB, and
the left and right eye images are provided, this parameter can be set.

Eye Priority: Set which image is sent first, the right eye image or the left eye image. Wear the 3D glasses to
watch the display. If the display is abnormal, set the parameter value to the other one. If the display is normal,
the setting is done.

3rd Emitter: When a third-party 3D signal emitter is used, set the switch to

Emitter Delay: Set the delay time of sending the synchronization signal from the 3D signal emitter to the 3D
glasses. This setting ensures that the switching between left and right eye images of the 3D glasses is in sync
with the switching between the left and right eye images on the display. This parameter applies to both the
NovaStar and third-party emitters.

6.4.4 Set Low Latency

Turn on the low latency function to reduce the delay at the controller, or increase the latency when the device is used
with high-latency equipment.
On the main menu screen, choose Advanced Functions > Output Settings.
Figure 6-13 Low latency
Perform any of the following operations as required.

Enable low latency
Set the Low Latency switch to

Set additional frame delay
a.
Select Additional Video Delay and then the value becomes editable.
b.
Rotate the knob to adjust the parameter to the target value, and then press the knob to confirm.

6.4.5 Set Bit Depth

Set the output bit depth of the input source.
On the main menu screen, choose Advanced Functions > Output Settings.
Figure 6-14 Bit depth
Select Bit Depth and then select the desired bit depth value from the drop-down options.
If Auto is selected, the output bit depth is the same as the input bit depth.
www.novastar.tech
MX40 Pro LED Display Controller User Manual
to enable the low latency function.
.
18