NovaStar MX Series User Manual page 11

Classification Content
Input
Screen
Port
OPT
Bottom line
www.novastar.tech
HDMI1, HDMI2, HDMI3, DP,
SDI, Internal
HDMI1 4096*2160@60.00Hz
4096*2160@59.94Hz
1–20
1–4
Sync: Genlock
HDR10
3D
MX40 Pro LED Display Controller User Manual
Description
The device input source type and status

Green: The signal is accessed normally and used.

Blue: The signal is accessed normally, but not used.

Red: The signal is not accessed, or the accessed signal is
abnormal.

Gray: The signal is abnormal and not used.
For related operations in the working mode of Send-Only
Controller, please refer to 5.1.1 Set Input
The resolution and frame rate of the currently available input
source
If multiple input sources are available, the resolution and frame
rate of each input source will be displayed one by one. If the
input is used by the layer, the layer number will be displayed
below.
For related operations, please refer to
Frame Rate (HDMI1, HDMI2, HDMI3 and DP
The screen resolution and frame rate
The screen brightness
For related operations, please refer to
Brightness.
The statuses of the Ethernet ports

Blue: Connected

Gray: Disconnected
The statuses of the OPT ports

Blue: Connected

Gray: Disconnected
The sync signal currently used and the signal status

Sync: Active Input: Sync with the frame rate of the current
input source

Sync: Genlock: Sync with the frame rate of the Genlock
signal

Sync: Internal: Sync with the frame rate of the internal clock
of the device
Color code:

Blue: The signal is normal.

Red: The signal is abnormal.
For related operations, please refer to
The format of the dynamic range
For-related operations, please refer to
HDMI2 and HDMI3 only).
The 3D function status

The icon displayed: The 3D function is turned on.

The icon not displayed: The 3D function is turned off.
For related operations, please refer to
Function.
Source.
6.2.2 Set Resolution and
only).
6.4.1 Adjust Screen
6.4.6 Set Sync Source.
6.2.4 Set HDR (HDMI1,
6.4.3 Enable 3D
8