Table of Contents
Advertisement
On the main menu screen, choose Advanced Functions > LED Screen Color.
Figure 6-10 LED screen color
Adjust the Gamma value.
1.
Select Gamma and then the value becomes editable.
2.
Rotate the knob to adjust the Gamma to the target value, and then press the knob to confirm.
Adjust the color temperature value.
1.
Select Color Temperature and then the value becomes editable.
2.
Rotate the knob to adjust the temperature to the target value, and then press the knob to confirm.
If you want to restore the parameters to the defaults, select Reset.
Press the BACK button to go back to the main menu, and then choose Screen Configuration > Save to RV Card.
Figure 6-11 Save to RV card
Select Yes in the displayed dialog box.
After the values are successfully saved, a message appears on the menu screen.
6.4.3 Enable 3D Function
Turn on the 3D function and set the related parameters.
On the main menu screen, choose Advanced Functions > 3D.
Figure 6-12 3D
Turn on the 3D function by toggling on this switch
Set the related parameters.
www.novastar.tech
MX40 Pro LED Display Controller User Manual
.
17
Advertisement
Table of Contents
