NovaStar MX Series User Manual page 23

On the home screen, the number of the layer that is using this input source is displayed in the input source
information area.

Scaling Mode: Set the scaling mode.
−
Custom: Customize the width and height.
−
Pixel to Pixel: Same as the width and height of the input source
−
Snap to Canvas: Same as the width and height of the canvas

Width: Set the layer width.

Height: Set the layer height.

H Position: Set the horizontal coordinate (X) of the layer on the canvas.

V Position: Set the vertical coordinate (Y) of the layer on the canvas.

Priority: Set the Z coordinate of the layer on the canvas. The greater the value, the higher priority.

Crop: Turn on or off input crop and set the crop size and position.

Border: Turn on or off layer border and set the border thickness and color.
If necessary, select other layers and set the related parameters.
www.novastar.tech
MX40 Pro LED Display Controller User Manual
20