System 2; Updating Module N 1700 - Mahr Millimar C 1202 Operating Instructions Manual

6.2

System 2

– Press the ON/OFF key
=> Menu appears.
– Press Ó,
System 2.

6.2.1 Updating module N 1700

! The firmware file for the N 1700
module must first be copied to a
Micro SD card using a PC. The card
is then inserted into the C 1202.
– Select the Flash module submenu
using the ▼ or
– Select using
using the
Ó
– Use ▼ or ▲
file for the N 1700 module in use, or
exit the submenu using the
! Please check that the right firmware
file is saved on the Micro SD card.
If the wrong firmware is sent to
the N 1700 module, it will stop
working and will have to be sent to
Mahr Service.
– Confirm selection by pressing key
76
or and to select
▲ key.
key or exit submenu
4
key.
to select the firmware
key.
Ó
4
Mahr GmbH • Millimar C1202