Mahr Millimar C 1202 Operating Instructions Manual page 36

– Use the
the ▼ or ▲
value.
– Use the
4
to exit the submenu.
Ó
Tolerance values for the lower value
and the upper value must be entered
relative to the nominal size.
If a greater number is entered for
the lower value than for the upper
value, the numbers will appear in
yellow. The entries cannot be saved.
– Use to select Upper value or
to finish editing the tolerance and
Ó
to accept changes, or
the Tolerance Editor without saving
the changes.
36
key to select the digit and
keys to enter the relevant
key to confirm the value or
to exit
Ó
▲ or
Mahr GmbH • Millimar C1202