Mahr Millimar C 1202 Operating Instructions Manual page 19

– Select the relevant measuring probe
type using ▼ or
=> See Technical Data in the operating
instructions for compatible
measuring probes.
– Confirm entry by pressing 4 key
cancel with
Ó
– Exit submenu with
settings menu by pressing the
key.
The instrument is most accurate after approx. 30 minutes of operation. Inductive
!
measuring probes should be mechanically set to the electrical zero point before the
first measurement. To do this, use the Absolute mode that indicates the raw value or
absolute value of the probe.
Mahr GmbH • Millimar C1202
▲
or
key
or exit the
Ó
19