Display Center At - Mahr Millimar C 1202 Operating Instructions Manual

3.2.9 Display center at

– Press the ON/OFF key
=> Menu appears.
– Use the key,
Ó
select the Feature (M1 / M2 / M3)
you wish to configure.
– Select the Display center at submenu
using the ▼ or
– Select using
using the
Ó
With asymmetric tolerances, the tolerance field might displayed outside the scaled
analog display. In this case, it is advisable to center the display to the center of the
tolerance rather than to the nominal size.
– Use the ▲ or ▼ key to select the
relevant centering.
– Use the key to confirm the
4
selection or
– Use the key to switch to
measuring mode.
Mahr GmbH • Millimar C1202
or and
▲ key.
key or exit submenu
4
key.
to exit the submenu.
Ó
to
45