Probe Type C1; Probe Type C2 - Mahr Millimar C 1202 Operating Instructions Manual

5.3.3 Probe type C1

– Select the Probe type C1 submenu
using the ▼ or
– Select using
using the
Ó
– Select the relevant probe type using
▼ or ▲.
If the N 1702 M module is being
!
used, the measuring signal from the
sensor is multiplied by the following
factor
Standard Range: x 1
Long Range: x10
For compatible probes, see
Section 8.2.
– Select using
key.
– Exit submenu with
settings menu by pressing the
key.

5.3.4 Probe type C2

Select probe type for channel C2
Implement the settings as described
under 5.3.3 Probe type C1.
Mahr GmbH • Millimar C1202
▲ key.
key or exit submenu
4
key.
key or cancel using
4
or exit the
Ó
Ó
61