Mahr Millimar C 1202 Operating Instructions Manual page 37

– Use the key to select the Upper
4
value submenu.
– Use the key to select the digit and
the ▼ or key to enter the relevant
▲
value.
– Use the key to confirm the value or
4
to exit the submenu.
Ó
– Use to select Lower value
or or to finish editing Tolerance
▲
Ó
and to accept changes or
exit the Tolerance Editor without
applying the changes.
– Use the key to switch to
measuring mode or
Feature submenu or
tolerance or ▼,
the submenu.
If a tolerance value is changed but the change has not yet been saved, the "Toler-
ance" text appears in gray.
The changed tolerance values can only be saved when the row with "On" or "Off"
appears in red.
Mahr GmbH • Millimar C1202
to
Ó
to exit the
Ó
to edit the
4
▲ to scroll through
37