Mahr Millimar C 1202 Operating Instructions Manual page 71

The display shows information on
how to position the probe at C1 for
the second measuring point.
– Use the key to confirm or
4
cancel the process.
Then go through the same process
for the probe at C2.
– Use the key to confirm or
4
cancel the process.
– Following successful measurement,
press to activate the customer
4
calibration or
process.
An error message appears if the
measured values of the customer
calibration are not plausible.
– Use to repeat the customer
4
calibration or
process.
Mahr GmbH • Millimar C1202
to
Ó
to
Ó
to cancel the
Ó
to cancel the
Ó
71