Raising/Lowering Roller System - Grizzly T32428 Owner's Manual

Raising/Lowering
Roller System
The roller system should be lowered whenever it
is not needed for outfeed support to prevent over-
reaching and to save space.
Keep fingers away from hinge points to
prevent pinch injuries.
Raising Roller System
To raise the roller system, simply grip the outer-
most rollers or roller frame, then lift the frame until
the folding support arm locks in place.
Figure 19. Raising roller system.
Model T32428 (Mfd. Since 11/21)
Lowering Roller System
To lower the roller system, grip the outermost roll-
ers or the roller frame. Slightly lift the frame and
push the hinge point on the folding support arm
with your foot. This will unlock the frame so it can
be lowered.
Figure 20. Lowering roller system.
-15-