Table of Contents
Advertisement
SECTION 4: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this equipment,
this maintenance schedule must be strictly
followed.
Ongoing
To minimize your risk of injury and maintain proper
operation, stop use of equipment immediately if
you ever observe any of the items below, and fix
the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged rollers.
•
Any other unsafe condition.
Weekly Maintenance
•
Clean rollers and hinge points.
Monthly Maintenance
•
Clean roller frame, support bracket, and
mounting beam.
•
Lubricate rollers and hinge points.
Cleaning &
Protecting
Cleaning the Model T32428 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it.
-16-
Lubrication
Keep hinge and pivot points and roller axles lubri-
cated for smooth operation and long life of your
equipment.
Items Needed
Mineral Spirits .................................... As Needed
Wire Brushes ..................................... As Needed
Shop Rags ......................................... As Needed
T26685 or ISO 32 Equivalent ............ As Needed
Hinge & Pivot Points
Oil Type .................T26685 or ISO 32 Equivalent
Oil Amount ....................................... 1 or 2 Drops
Lubrication Frequency .............................Monthly
Use a rag to clean any built-up resin or dust from
hinge and pivot points (see Figure 21) before
applying a few drops of lubricant to these loca-
tions. Lower and raise roller system a couple
times to distribute the lubricant.
Pivot Point
Hinge Point
Pivot Point
Figure 21. Location of hinge and pivot points.
Roller Axles
Oil Type .................T26685 or ISO 32 Equivalent
Oil Amount ................................................ 1 Drop
Lubrication Frequency .............................Monthly
Clean each roller with mineral spirits before apply-
ing a drop of lubricant at each roller axle.
Model T32428 (Mfd. Since 11/21)
Qty
Advertisement
Table of Contents
