Site Considerations - Grizzly T32428 Owner's Manual

Physical Environment
The physical environment where a machine is
operated is important for safe operation and lon-
gevity of components. For best results, use this
equipment in a dry environment that is free from
excessive moisture, hazardous chemicals, air-
borne abrasives, or extreme conditions. Extreme
conditions for this type of equipment are gener-
ally those where the ambient temperature range
is outside 41°–104°F; the relative humidity range
is outside 20–95% (non-condensing); or the envi-
ronment is subject to vibration, shocks, or bumps.
Space Allocation
Consider the largest size of workpiece that will
be processed with this equipment and provide
enough space around the machine and roller
system for adequate operator material handling or
the installation of auxiliary equipment. With per-
manent installations, leave enough space around
the table saw to open or remove doors/covers
as required by the maintenance and service
described in its manual. See below for required
space allocation for this roller system.
-8-

Site Considerations

36½"
Figure 3. Minimum working clearances.
Weight Load
Refer to the Machine Data Sheet for the weight
of your table saw. Make sure that the surface
upon which the machine is placed will bear the
weight of the machine, additional equipment that
may be installed on the machine, and the heaviest
workpiece that will be used. Additionally, consider
the weight of the operator and any dynamic load-
ing that may occur when operating the machine.
Lighting
Lighting around the machine must be adequate
enough that operations can be performed safely.
Shadows, glare, or strobe effects that may distract
or impede the operator must be eliminated.
Children or untrained people
may be seriously injured by
table saw. Only install in an
access restricted location.
40" (From Saw Cabinet)
Model T32428 (Mfd. Since 11/21)