Kramer MV-4X User Manual page 30

Adjusting Input Parameters
For each operation mode you can adjust the input settings. Not all parameters are available
for each operation mode.
To adjust input parameters:
1. Click AV on the Navigation List. The AV Settings page appears (see
2. Click Inputs tab.
3. For each input you can perform the following:
▪
Change the input name.
▪
Set HDCP on each input on (green) or off (gray).
▪
Set the aspect ratio for each input.
▪
Mirror the image horizontally (green).
▪
Apply a Border to the image (green).
▪
Set the Border color of the image from the drop-down box.
▪
Rotate each input image independently by 90, 180 or 270 degrees.
MV-4X – Using Embedded Web Pages
Figure 13: AV Settings – Inputs Tab
Kramer Electronics Ltd.
Figure 11).
28