Page 1
Scan for full manual Step 1: Check what’s in the box MTX3-34-M 34x34 8K Modular Matrix 1 Set of rack ears (attached) 1 Quick start guide 1 Power cord Step 2: Get to know your MTX3-34-M Feature Function Numeric Numbers 1 to 0 Keypad ◄...
Page 2
MTX3-34-M ID numbers The matrix cards that are installed to the MTX3-34-M, can have input and/or output ports. Each inserted card is allocated with 2 port ID numbers. Port input/output directions are defined per ID number. The port ID numbers are written on the chassis, next to each card-insertion slot.
Page 3
Insert the input and output cards into the card slots and then connect the inputs and the outputs. You can insert cards into slots while the device is powered. For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/MTX3-34-M.
Page 4
Setup to reset the matrix to the default setup or factory default setup. VOSW lists video output port IDs and VISW shows the video input port ID connected to the output ID above it. Step 7: Operate the MTX3-34-M RS-232 Control / Protocol 3000 Operate MTX3-34-M via: •...
Need help?
Do you have a question about the MTX3-34-M and is the answer not in the manual?
Questions and answers