Table of Contents
Advertisement
Available languages
Available languages
3.2
Scope of delivery
INFORMATION
The drilling-milling machine is delivered pre-assembled.
Compare the delivery volume with the attached packing list.
Check the status of the machine immediately upon receipt and claim possible damages at the
last carrier also if the packing is not being damaged. In order to ensure claims towards the
freight carrier we recommend you to leave the machines, devices and packing material for the
time being in the status at which you have determined the damage or to take photos of this
status. We would like to ask you to inform us about any other claims within six days upon
receipt of the delivery.
3.3
Installation and assembly
3.3.1
Requirements regarding the installation site
The working area for operating, maintenance and repair must not be hindered.
The main switch of the drilling-milling machine must be freely accessible.
The illumination of the working place has to be such that an intensity of illumination of 500 Lux
is attained at the tool tip.
If this is not ensured with the common illumination at the place of installation it is necessary to
use an optionally available workplace lamp.
3.3.2
Load suspension point
WARNING!
Danger of crushing and overturning. Proceed carefully when lifting, installing and
assembling the machine.
Firmly clamp all clamping levers on
the drilling-milling machine before lift-
ing the drilling-milling machine.
Insert a sufficiently large solid profile
of steel (round steel bar with a diame-
ter of approximately 30mm and length
of approximately 800mm) through the
bore of the machine base.
Hook one lifting sling onto either end of the steel bar.
Make sure that the load attachment point is balanced (centre of gravity).
Lift and transport the machine using an appropriate lifting device (crane, etc.).
Make sure that the load attachment does not cause damage to components or paint.
EN
MB4P ǀ MB4PV
82
Bore
machine base
Ø 30mm
Translation of original instructions
Img.3-1:
Machine substructure
Version 1.1.8 - 2021-7-29
Advertisement
Table of Contents
