Density Panel - Emerson Micro Motion 3711 Configuration And Use Manual

Configuring the Core Interface
Table 5-1 Mass flow configuration parameters continued
Parameter Description
Flow Temp Coeff One of the values required to characterize the Model 3711 for
(FT) the particular sensor it is using. See Section 5.5.1.
Meter Factor The adjustment to be applied to the mass flow process variable.
See Section 5.5.3.
Mechanical Zero Displays the zero value derived from the most recent zero
procedure.
5.4.2

Density panel

The Density panel is shown in Figure 5-3. Parameters on this panel control how the sensor will
measure and report density data to the Model 3711. Parameters are listed and defined in Table 5-3.
Figure 5-3 Density panel
40
Comments
Default: 1.0
Read-only.
®
Micro Motion Model 3711 Gas Flow Computers