Table of Contents
Advertisement
Chapter 3
System Configuration
3.1
Overview
This chapter discusses the following topics:
•
Setting the Model 3711 clock
•
Configuring security
•
Configuring device information
•
Configuring the Auto Scan interval
•
Configuring TLP display options
Note: During the configuration process, save your data frequently, both to the PC and to the
Model 3711's flash memory. To save your data to a file, click File > Save Configuration. To save your
data to flash memory, click Device > Flags > Save Configuration. For information on flash memory,
see Section 14.3.
3.2
Setting the Model 3711 clock
Setting the Model 3711 clock is required for accurate timestamping and control of the historical
databases, event log, and alarm log.
To set the Model 3711 clock:
1. Connect to the Model 3711.
2. Click
Device > Clock
Figure 3-1 is displayed.
3. If the clock in your PC is set correctly, click the red circle in the lower left corner of the
calendar to synchronize the Model 3711 clock to the PC clock. If the clock in your PC is not
set correctly, use the ROCLINK 800 calendar to select the day, month, and year. Then enter the
time in the time field, or use the arrows. Use
4. If you want the clock in the Model 3711 to automatically adjust for daylight savings time,
click
Enabled
5. Click
Apply
6. Click
Update
7. Click
OK
Configuration and Use Manual
, or click the
.
.
to update the ROCLINK 800 screen to the current Model 3711 value.
.
icon in the toolbar. The dialog box shown in
Clock
and
for
A
P
AM
and
.
PM
15
Advertisement
Table of Contents
Troubleshooting
