Panel Mounting
To mount the IPC in a panel mount configuration, the user will need to connect Mounting Panel #R2B00ACCMP01 to the
rear of the IPC:
1. Place the mounting plate on the rear of the IPC.
2. Using a T9 Torx driver, secure the mounting plate with two M3x6 screws, tightening to 0.6 Nm. (Do not
overtighten.)
3. For regular mounting, secure the mounting plate and IPC through the top and bottom center holes. For more
rugged applications, attach four screws in all four corners of the mounting panel.
Figure 7: Panel Mounting Configuration
Figure 8: Attaching the Panel Mounts to the RXi2-BP IPC
6
GFK-3196 - RXi2 - BP Industrial PC Quick Start Guide
GFK-3196B