Allied Systems W8L Operating Manual page 55

Towing winch

Hide thumbs Also See for W8L:

Table of Contents

LINE-IN

Step 5. When the vehicle is on ﬁ rm ground, the operator

can move the control lever to LINE-IN position to pull the

load toward the vehicle.

Operating Techniques, Electronic Controls

BRAKE-OFF

Step 6. When the operator wants to disconnect from the

load, the vehicle is stopped and the control lever is moved

to the BRAKE-OFF position to loosen the wire rope. The

wire rope is then disconnected from the load. At the end

of the winch usage period, turn off the activation switch.

Table of Contents

Troubleshooting

Do you have a question about the W8L and is the answer not in the manual?