Allied Systems W8L Operating Manual page 29

PROBLEM
Clutch does not apply
correctly.
Clutch does not apply correctly
at low PTO rpm.
Winch stalls tractor engine
during winch shift when tractor
RPM is low.
POSSIBLE CAUSE
Worn or damaged clutch.
Control valve or control cable
needs adjustment.
Low oil pressure.
Accumulator not charged.
PTO stalled (0 rpm).
Worn or leaking pump.
Not enough engine torque.
Low accumulator pressure.
Figure 10 - Troubleshooting Analysis Chart
Operation, Power Controls
CORRECTION
See the Service Manual for additional
troubleshooting, checks and
adjustments.
Check accumulator.
Increase tractor rpm.
Check pump and replace if
necessary.
Increase engine rpm.
See the Service Manual for additional
troubleshooting, checks and
adjustments.
17