Safety Equipment - XCMG XE210C Operating & Maintenance Manual

XE210C Hydraulic Excavator

Safety equipment


Ensure all shields and cover plates in the proper positions. If any damage for them, please repair
immediately.

Understand the use methods of the safety devices and use them correctly.

It is prohibited to dismantle any safety devices and keep them in a good working condition.
Keep the machine clean

If the water inflows into the electrical system, it will cause the instruments not to work and the
machine to be faulty. It is banned to use the water or steam to flush the electrical system
(such as the sensors and connectors, etc.).

If the machine brings with mud or oil contamination, it is dangerous to slide over and fall down while
checking or maintenance.

Please keep the machine clean always.
Keep the driver' cab clean
 Be sure to remove the mud and the oil contamination in the soles before entering the driver' cab. If
the mud or oil contamination is adhered on the soles, it is sliding when operating the pedals and
possible to result in serious accidents.
 Do not put the parts or tools around the driver' cab.

Do not stick the plastic sorbent pad to the window glass because its magnifier role may cause fire.
 When driving or operating the machine, do not use wireless telephone in the driver' cab.
 It is banned to bring dangerous goods (such as the flammable and exposable goods) into the driver'
cab.
Leave the operator's chair after locking the working devices

Before leaving the chair (e.g. when opening or closing the front window or the roof window,
dismantling or installing the bottom window and adjusting the chair), lower the working devices
down to the ground completely and then shut down the engine to avoid touching the operating lever
and make the machine move suddenly to cause serious injury or damage the machine.
Operating and Maintenance Manual 18