XCMG XE210C Operating & Maintenance Manual page 129

XE210C Hydraulic Excavator
Operating
conditions
Pre-operation: check if the screw plug and all the drain plugs are tightened.
Mud field, rainy or
After-operation: clean the machine, and check if there are broken, damaged, loose or missed nut and
snowy
bolt, and lubricate all the required parts immediately.
Pre-operation: check if the screw plug and all the drain plugs are tightened.
Seaside After-operation: clean the machine thoroughly with clean water to remove the salt content, and maintain
the electric appliances frequently to avoid their corrosion.
Air filter: clean the filter elements at regular service intervals.
Radiator: clean the mesh enclosure of oil cooler to avoid the blockage of radiator core.
Dusty air Fuel system: clean the filter elements and sieve at regular short service intervals.
Electric appliances: clean them at regular intervals, especially the terminals of AC generator and starting
motor.
Fuel: adopt the appropriate low-temperature high-quality fuel.
Lubricant: adopt the high-quality low-viscosity hydraulic oil and engine oil.
Engine coolant: be sure to adopt the anti-freezing agent.
Frosty weather Battery: charge the battery up at short regular intervals. In case of not charging the battery up, the
electrolyte may be frozen.
Crawler: keep the crawler clean, and park the machine on the hard ground to avoid freezing the crawler
on the ground.
Crawler: careful operation. Check if there are broken, damaged or missed bolt and nut frequently, and
loosen the crawler a little looser than usual.
Stony ground
Working device: in case of digging the stony ground, the standard accessories may be damaged, adopt
the front reinforced bucket or heavy-duty bucket.
Falling rocks Cab: if necessary, install the cab roof support to avoid the damages of falling rocks to the machine.

Maintenance of engine
―See "Operating Instructions of Engine" in details.

Maintenance of air conditioner
―See "Operating Instructions of Air Conditioner" in details.
Table 2-7 Maintenance under Special Environment Conditions
Operating and Maintenance Manual 129
Maintenance cautions