Periodic Replacement Of Parts - XCMG XE210C Operating & Maintenance Manual

XE210C Hydraulic Excavator
In order ensure the safety of operation, be sure to check the machine at regular intervals. If any of the
following parts is damaged, it may cause a severe accident or fire. The deterioration or damage of these parts
is difficult to determine via a visual check, so these parts shall be replaced at the intervals shown in the table
below, however, if they are found to be poor during the check, they shall be replaced before the operation of
machine, regardless of the interval of replacement.
In case of replacing the hose, it's also required to check their pipe clips for deformations, breakage or
damages, and replace them according to the demands. Be sure to check all the following hoses at regular
intervals, and replace or tighten any poor part as per the demands.
Engine
Basic body
Hydraulic
system
Accessories of
working device

Periodic replacement of parts

Table 2-12 Periodic Replacement of Key Parts
Part replaced at regular intervals
Fuel hose (from fuel tank to filter)
Fuel hose (from fuel tank to injection pump)
oil filter hose (from engine to oil filter)
Oil pump inlet hose
Oil pump outlet hose
Hydraulic hose of rotation gear
Hose of movable arm hydraulic cylinder pipeline
Hose of bucket rod hydraulic cylinder pipeline
Hose of bucket hydraulic cylinder pipeline
Hose of pilot pipeline
Operating and Maintenance Manual 139
Replacement interval
Every two years
Every two years
Every two years
Every two years
Every two years
Every two years
Every two years
Every two years
Every two years
Every two years