XCMG XE210C Operating & Maintenance Manual page 53

XE210C Hydraulic Excavator
Engine coolant high temperature
4
alarm
5 Oil pressure alarm
6 Engine preheat indicator
7 Charge alarm
8 Idle button
9 Button for choosing work mode
10 Up/ button of increase
11 Down/ button of decrease
12 Button for choosing work mode
13 Muffling/identificating button
14 Button for menu/changing screen
15 Fast/slow treading button
16 Fuel filter blockage alarm
17 Malfunction indicator
18 Fuel oil level alarm
Leading hydraulic filter blockage
19
alarm
Operating and Maintenance Manual 53
On for high temperature of engine coolant
On for low pressure of engine oil
On for the process of engine preheat
On for abnormal engine battery charge
When the machine is started, automatic idle
speed is set by default. Being pressed once, the
automatic idle speed is canceled. Being pressed
again, the automatic idle speed is restored.
When the machine is started, mode S works. Being
pressed once, circular options is made in order of
S→H→B→L→S
Being pressed, cursor move upward once after
entering the main menu catalogue
Being pressed, cursor move downward once after
entering the main menu catalogue
When the machine is started, mode S works. Being
pressed once, circular options is made in order of
S→L→B→H→S
Being pressed, warning sound stops;
Confirm the cursor column after entering the main
menu
Being pressed once, it shows the optional indication
interface in order of "main menu→chart→main
menu" in cycle
Being pressed once, it shows treading mode will be
chosen circularly in order of "fast→slow→fast"
On for a blockage in the fuel filter
ESS malfunction indicator
On for leading hydraulic filter blockage