XCMG XE210C Operating & Maintenance Manual page 55

XE210C Hydraulic Excavator
b) When the key switch is turned to ON, the interface of the instrument is as follows:

Button instructions:
a) ,
between positive display liquid crystal to realize power mode switch. The switch can be carried
out in heavy load mode (H), simple load mode(S), light load mode (L) and pulverized load mode
(P).
，
b)
through which required information can be chosen.
c) Automatic idle speed button
at the lower left. Three seconds later, the controller pulls the pointer from the current throttle
position to the idle speed position as follows:
after the automatic idle speed button is pressed again,
controller automatically pulls the pointer from the idle speed position to the throttle position.
d) High and low speed moving button
valve obtains electricity, which enables high speed moving of the machine, the icon
appear at the upper left, as shown in the following figure:
Date time and information display area
The two buttons are respectively corresponding to functions of the instruction area
The two buttons are respectively up key and down key when it comes to the menu,
: after the automatic idle speed button is pressed, there will be
Date time and information display area
Operating and Maintenance Manual 55
at the lower left disappears, and the
: after the key is pressed, the moving electromagnetic
will