Safety Maintenance Instructions - XCMG XE210C Operating & Maintenance Manual

XE210C Hydraulic Excavator
Warning labels
 'No operation' warning label must be hung on
work device operating lever in the cab to warn that
someone is maintaining the machine. If necessary,
the warnings should also be published around the
machine.

Put the warning away in the tool box.

When maintaining, if someone starts the engine,
contacts or operates the working device operating lever, serious injury or machine damage will be
caused.
Keeping the work area clean and tidy

Do not scatter the hammer or other tools in the work area. Wipe off all slippery grease, oil or other
substances. Keep the work area clean and tidy, so as to secure the working process.
If the work area is not kept clean and tidy, persons may stumble, slip or drop, and cause injury.

Top window which is made by organic glass (polycarbonate) should be cleaned with water, and not
with any alkaline solvent. If benzene, toluene, methanol or other basic solvent are used, chemical
reaction will be caused, like that glass is dissolved or decomposed, and polycarbonate will age.
When persons work with others, one header should be commanded.

When the machines are fixed, or when the work device is removed, one header should be commanded,
and then, other persons obey his command in the operating process. When working together, persons
that do not mutually know can lead to serious accidents.
Shut off the engine before maintenance

The machine should be stopped on solid and flat
ground surface.

The place with not fallen stones, collapses or is of
no danger of being submerged should be chosen.

Completely descend the working device onto the
ground, and shut off the engine.

Put stopper blocks under the crawler belt in order to
prevent the machine moving.

Safety maintenance instructions

Operating and Maintenance Manual 42