XCMG XE210C Operating & Maintenance Manual page 77

XE210C Hydraulic Excavator
(Turn right)
Fig.1-48
Note: during a long journey, you can relax your feet by stepping on continuously the protruding
part of pedal (D in picture). To achieve the smooth operation, a damper has been installed on treading
guidance valve. When the weather is cold, operational force will be
increased. At this time, you can operate first
the treading control lever for several times
when the safe locking lever is at LOCK position.

Drive the machine through treading control lever
a) Travel forward：push forward two treading
control levers (A in picture).
b) Travel backward: pull backward two treading control
levers (B in picture).
c) Middle position：when treading control lever is in middle position(C in picture), the machine will be
braked by treading brake.
d) Turn right: push forward the left treading control lever.
e) Turn left: push forward the right treading control lever.
f) Rotate at the original position (self-rotation): push forward one treading control lever while pull
another one.

Switch of treading mode
Caution: since rolling over of the vehicle will result in the casualty, so don't change
the treading mode frequently, especially during the downgrade. Changing to a fast mode
will produce a very severe result. Remember to stop the machine before changing the
treading speed.
You can choose treading mode (fast/slow) through the
switch of treading mode on monitor, which will give you
the following two choices by turns with every press.
a) Fast: indication is on.
b) Slow: indicator is off.
sign (fast)
Operating and Maintenance Manual 77
(Rotate at original point)
Fig.1-49
(Forward and backward)
Fig.1-50
Fig.1-51
1－switch of treading mode
2－fast-speed indicator