Table of Contents
Advertisement
XE210C Hydraulic Excavator
machine.
For the bucket rod and bucket hydraulic cylinder that are fully extended, fall the movable arm until
the bucket contacts the ground.
a)
Pull the safety locking rod to LOCK (lock).
b)
Stop the engine, and remove the key from key
switch.
c)
Adopt the steel rope and supporting rod with
enough length, make them not contact the
machine during the lifting. Wrap some protective
material around the steel rope or supporting rod as
per the demands to avoid the damages to machine.
d)
Drive the crane in proper lifting position.
e)
As shown in Fig.3-7, make the steel rope pass under the chassis frame on both sides, and attach it to
the crane.
Operating and Maintenance Manual 143
Supporting lever
Gravity center
Fig. 3-7
Hide quick links:
Advertisement
Table of Contents
