XCMG XE210C Operating & Maintenance Manual page 23

XE210C Hydraulic Excavator

When installing the optional parts or accessories, please contact the Xugong excavator distributor in
advance.

Any injuries, accidents or product faults caused by using the accessories or parts without approval
from Xugong Excavator Mechanical Co., Ltd. will be unrelated with this company.

When installing and using the accessories, combine the operating accessories according to the
instruction manual about the accessories and the general instruction about the accessories in this
manual.
Due to the different types or combinations for the working device, there is the risk that the working device
crashes with the driver' cab or other parts of the machine. Before using the unfamiliar working device, check
whether there is the risk to influence each other and operate carefully.
The window glass for the driver' cab
 If the glass close to the working device in the driver' cab crushes, the working device has the risk to
contact the operator body directly, please stop operating and replace the glass immediately.
Modification without approval
Any modification without approval from Xugong Excavator Mechanical Co., Ltd. is possible to cause danger.
Therefore, before modifying, please contact the distributor of Excavator Mechanical Co., Ltd.

For any injuries, accidents or product faults caused by modification without approval from Xugong
Excavator Mechanical Co., Ltd., the company will not bear any responsibilities.
Safety in the work place
Before operating, check the work area thoroughly for dangers.

When operating near the flammable materials (cottage roof, dry leaves or grasses) stored, it is
possible to cause a fire, so it is necessary to be careful during operating.

Check the ground situation in the work place and finalize the safest operation method.It is banned to
operate in the place with collapses or falling stones.

If there are water pipes, gas pipes or high voltage electrical wires buried under the work place, please
contact the related companies and mark their positions, note: do not break or damage any pipes and
wires.

It is banned any unauthorized person to enter the
working area, some necessary warning measures
to be taken.

Before moving or operating in the shallow water
or on the soft ground, check the types and
situation of the sill and the depth and the flow rate
of the water.
Installation for the accessories
Operating and Maintenance Manual 23