Installing The Wide Area Virtualization Engine - Cisco Wide Area Virtualization Engine 274 Hardware Installation Manual

Installing the Wide Area Virtualization
Engine
This chapter describes how to install a Wide Area Virtualization Engine (WAVE)
appliance on a tabletop, on a wall, or in an equipment rack. This chapter contains
the following sections:
•
•
•
•
•
•
•
Before you begin the installation, read
Area Virtualization Engine"
Information for the Cisco Wide Area Virtualization Engines
Read the installation instructions before connecting the system to the power
Warning
source. Statement 1004
OL-17739-01
Installing the WAVE Appliance on a Tabletop, page 3-2
Installing the WAVE Appliance on a Wall, page 3-2
Installing the WAVE Appliance in an Equipment Rack, page 3-5
Connecting Cables, page 3-8
Connecting Power and Booting the System, page 3-8
Checking the LEDs, page 3-9
Removing or Replacing a WAVE Appliance, page 3-9
Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide
C H A P T E R
Chapter 2, "Preparing to Install the Wide
and the Regulatory Compliance and Safety
3
document.
3-1