Inline Adapter Specifications - Cisco Wide Area Virtualization Engine 274 Hardware Installation Manual

Inline Adapter Specifications

Inline Adapter Specifications
Table A-2 Inline Network Adapter Specifications
Specification
Copper Gigabit Ethernet Specifications
IEEE standard
Full duplex and half duplex
Autonegotiation
Data transfer rate
Ports
General Technical Specifications
Interface standard
Size
PCI Express card type
PCI Express connector
PCI voltage
Weight
Operating humidity
Operating temperature
Storage temperature
Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide
A-4
Table A-2 describes the inline network adapter technical and general
specifications.
Description
Gigabit Ethernet, 1000BASE-T
Fast Ethernet, 100BASE-T
Ethernet, 10BASE-T
Supports both half-duplex and full-duplex operation in all operating
speeds
Autonegotiates between full-duplex and half-duplex operations and
between 1000-Mbps, 100-Mbps, and 10-Mbps speeds
1000-Mbps, 100-Mbps, and 10-Mbps speeds per port in half-duplex
mode
2000-Mbps, 200-Mbps, and 20-Mbps speeds per port in full-duplex
mode
2 × RJ-45 socket connectors
PCI-Express Base Specification Revision 1.0
PCI Short add in card: 6.6 × 4.4 in. (167.6 × 111.2 mm)
×4
Gold Finger: ×4
+3.3 V ±9%
+12 V ±8%
6.4 oz (180.0 g)
0 to 90%, noncondensing
32 to 122 °F (0 to 50 °C)
–4 to 149 °F (–20 to 65 °C)
Appendix A Wide Area Virtualization Engine Hardware Specifications
OL-17739-01