Table of Contents
Advertisement
Software Release:
[Application Version 2.8.10128; Configuration Version 2.8.10457]
Icon
Icon Troubleshooting
The warnings and shutdowns internally generated by the controller will show an Internal Fault on
the top of the screen when a fault is displayed. Check all fluid levels and pressures. Ensure the
cooling system and engine are functioning properly.
The warnings and shutdowns the ECU generates will also be accompanied by a cause for the error.
Consult with the engine manufacturer regarding fault codes shown on the screen.
If everything checks out normal, consider checking the set points or the bypass timer(s) to ensure
the ranges are within normal operating settings.
Section 40
2016-04-19
Current Oil Pressure
Current RPM
Ambient Temperature
Oil Temperature
System Level
Suction Pressure
Percent Load at Current RPM
Current Engine Temperature
Battery Voltage
25
Description
00-02-0939
Advertisement
Table of Contents
Need help?
Do you have a question about the MURPHY PowerCore MPC-10 and is the answer not in the manual?