Enovation Controls MURPHY PowerCore MPC-10 Operation Manual page 24

Software Release:
[Application Version 2.8.10128; Configuration Version 2.8.10457]
Icon
Continued on next page
Section 40
2016-04-19
Displays when engine aftertreatment is in need of regeneration. This is
due to the aftertreatment filter reaching the engine manufacturer's set
soot level for a regeneration to occur.
Displays when the Engine ECU has inhibited a regeneration from
occurring. This should also be shown when inhibiting regeneration
selection is made in the menu.
Displays when an emissions aftertreatment malfunction has occurred.
Contact your local engine manufacturer's service department for
direction.
Displays when an active and unacknowledged DTC warning exists.
The icon will only disappear if the fault has been acknowledged and is
no longer active.
Displays when an active (unacknowledged) DTC shutdown exists.
Gear Box Pressure
Fuel Rate
Fuel Level
Flow Rate
Engine Shutdown
Engine Oil Level
Discharge Pressure
24
Description
00-02-0939