Setting The Implement Width; Changing The Hour Display - Valtra T series Versu Operator's Manual

3. Operation
• Decrease a parameter value.
•
•
• Select the next parameter to be changed.
Press the
3.10.5.3

Setting the implement width

I m p l e m e n t W i d t h
c m
GUID-A4A6D237-C3F1-4670-86FE-5E11C540845A
1. Implement width
1. Activate the implement width in the setting mode.
2. Change the value.
3.10.5.4

Changing the hour display

S e t C l o c k
18:10
GUID-90E2425C-1409-4C2C-A157-F845D9E5A823
1. Hour display
1. Activate the hour display in the setting mode with the
When the hour display is blinking, you can set the hours.
2. Change the value with the arrow buttons.
Press the down arrow button.
The parameter decreases one step at a time.
Press and hold down the down arrow button.
The parameter value decreases continuously.
button.
350
- 148 -
1
1
button.