Cruise Control - Valtra Q Series Quick Start Manual

Q Series Quick Guide

CRUISE CONTROL

Push the drive lever to the right to engage cruise, hold for 2 seconds to store the new speed.
1.
When cruise control is activated the cruise speed can easily be adjusted via the thumb wheel
2.
located on the drive lever.
Re-active cruise speed by quickly pushing the drive lever to the right.
3.
The cruise deactivates:
• by pressing brake pedals
• pushing the drive lever left
4.
• Starting to use the drive lever
After deactivating speed is controlled by either the drive pedal or lever.
VALTRA EXPERT
Together with the memory buttons
M1,M2 and M3 it is possible to save
up to four different cruise speeds at
once.
When driving in manual mode, there works, instead of speed cruise, a Transmission Ratio memory.
NOTE:
ACTIVATION
DEACTIVATION
TIP
ADJUSTMENT
14