Festo CPX-CMIX-M1-1 Brief Description page 12

Removing:
S
Remove the screws and lift the CMIX up carefully.
Mounting:
1. Check the seal and sealing surfaces and refit the
connection block.
2. Screws must be fitted so that the self-cutting threads
can be used. Tighten the screws by hand in diagonally
opposite sequence. Tightening torque 0.9 ... 1.1 Nm.
3.3 Pin assignment of axis connection
X
12
Pin Assignment
1 +24 V logic voltage
2 +24 V load voltage
3 0 V
4 CAN_H
5 CAN_L
Housing Cable shield
Festo CPX−CMIX−Z6 1112NH English