Configuring Bluetooth; Bluetooth Profiles - Cisco Small Business SPA525G2 User Manual

Using the Web Configuration Utility

Configuring Bluetooth

Configuring Bluetooth

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
The Cisco SPA525G and Cisco SPA525G2 support Bluetooth to allow use of the
phone with a Bluetooth-enabled headset. (See
Headsets" on page 18.) Only the Cisco SPA525G2 supports the use of your
Cisco IP phone in conjunction with Bluetooth-enabled mobile phone.
The mode that determines if the phone is set to pair with a headset, mobile phone,
or both is set on the IP phone. For more information on using Bluetooth with your
phone, see Using the IP Phone With Your Bluetooth-Enabled Mobile Phone,
page 62.
To configure Bluetooth from the phone web user interface:
Log in to the phone web user interface.
Choose the Bluetooth Configuration tab.
Ensure Bluetooth Device is set to On.
Click Search Bluetooth Devices. When found, your device appears in the Bluetooth
Device List.
Select the device.
Enter your PIN.
Click Submit All Changes.

Bluetooth Profiles

If you have both a headset and a Bluetooth-enabled phone paired with your
Cisco SPA525G2, the phone can only connect to one device at a time. If multiple
Bluetooth devices are in range of the IP phone, the order of the devices in the
Bluetooth Profiles list is used to determine which device the phone will attempt to
pair with first. The device with a higher order priority number is attempted first.
Use the arrow keys to move devices up and down in priority order.
Choose yes or no in the Connect Automatically column to determine if the phone
will attempt to connect automatically when it detects that Bluetooth device. You
can also select a device and click Remove to remove a device from the list.
"Connecting Bluetooth
5
93