Using Wi-Fi Protected Setup With The Cisco Spa 525G - Cisco SPA 500 User Manual

Installing Your Phone
Connecting Your Phone to the Computer Network
STEP 5
STEP 1
STEP 2
Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide
Scroll to Wi-Fi Configuration and press the Right Arrow key. Choose one of the
following options:
•
Wireless Profile—Use this option to add a new wireless profile (either
manually or by scanning for available networks), edit an existing wireless
profile, or connect to a previously configured network. See
a Wireless Profile on the Cisco SPA 525G, page
•
Wi-Fi Protected Setup—If your wireless router supports Wi-Fi Protected
Setup, use this method to set up your wireless connection. See
Protected Setup with the Cisco SPA 525G, page

Using Wi-Fi Protected Setup with the Cisco SPA 525G

If your router has a WPS button, you can use Wi-Fi Protected
Setup to add a new wireless network profile.
In the Wireless Configuration window, select
Choose one of the following options:
Push Button Configuration:
a. Press the WPS button on your router.
b. On your phone, with
phone may reboot before the Wi-Fi connection is working.
PIN Configuration
a. After selecting PIN Configuration on your phone, note the PIN displayed.
b. Connect to your router's web interface using a web browser. Your computer
must be connected to your wireless network. Enter the IP address of the
wireless router in the browser address bar.
c. If required, enter the user name and password. (By default, Linksys routers
typically use "admin" for the user name and "admin" for the password.)
d. View the Wireless tab or window. Locate the Wireless Protected Setup
configuration menu.
Push Button Configuration
Manually Adding
32.
31.
Wi-Fi Protected Setup
highlighted, press Select. Your
2
Using Wi-Fi
.
31