Using Hp Maxilife To Diagnose Problems - HP XL Class 500/550MHz User Manual

Pre-Boot Checks
Error!
No CPU 1
Check that processor is
correctly installed in
socket 1.
Error!
CPU Freq
Ensure that the two
processors installed are the
same speed (frequency).
Error!
Power supply
Check power supply and
power cable connections.
Error!
BIOS
Flash new BIOS or start
system using crisis switch
(system board switch 10).
Troubleshooting Your HP Visualize Linux Workstation

Using HP MaxiLife to Diagnose Problems

Using HP MaxiLife to Diagnose Problems
Your HP LCD can help you to diagnose problems with your HP
V Linux Workstation, even when you are unable to get your
ISUALIZE
system and monitor working properly.
When you press your HP V
HP MaxiLife will check your system before it initiates the start-up
sequence. You will see one of the following screens on the LCD:
Error!
CPU Socket 2
Check that a processor or
terminator is correctly
installed in socket 2.
Error!
CPU Type
Ensure that the two
processors installed have
the same cache voltage.
Error!
Power
Check that configuration of
VRMs and terminators is
correct or that the power
supply is properly
connected.
Error!
No Video
Check that graphics card is
installed correctly.
24
Linux Workstation's on/off button,
ISUALIZE
Error!
Power CPU 1
Check installation of VRM
1.
Error!
Power Cache
Ensure that VRM is
correctly installed in
VRM 2 socket.
Error!
RAM type
Check that RAM types
installed are compatible.
HP KAYAK XU
No errors occurred during
pre-boot. POST is
initiated.
Error!
Power CPU 2
Check installation of VRM
3.
Error!
Board PLL
Check system board.
Error!
No RAM
Check memory installation.
Chapter 3