Installing Mass Storage Devices; Connecting Devices - HP XL Class 500/550MHz User Manual

How to Install Accessories In Your HP Visualize Linux Workstation

Installing Mass Storage Devices

Installing Mass Storage Devices

Connecting Devices

If you add an additional mass storage device, you need to connect it to
power and data cables. The figure below shows all data cables and power
connectors provided.
Cable with one
connector for 3.5-inch
Flexible Disk Drive
16-bit SCSI with five
68-pin SCSI
16-bit External 68-
pin SCSI connector
8-bit SCSI with
two
20
34-pin connector
68-pin SCSI connectors
Cable with two 40-pin
connectors for IDE Drives,
such as CD-ROM Drives, Zip
Drives or Hard Disk Drives
Power Cables for Hard
Disk Drives, Zip
Drives, Tape Drives,
CD-RW, and
CD-ROM Drives.
Power Cable for 3.5-
inch Flexible Disk Drive
Chapter 2