Connecting The Power Cords - HP XL Class 500/550MHz User Manual

WARNING
Setting Up and Using Your HP Visualize Linux Workstation

Connecting the Power Cords

1. Remove any warning labels that may be covering the computer's
power connector on the rear of the computer.
2. Connect the power cords to the display and the computer. (The
connectors are shaped to go in one way only.)
Display Power
3. Connect the display's power cord and the computer's power cord to
grounded outlets.
For your safety, always connect the equipment to a grounded
wall outlet. Always use a power cord with a properly grounded
plug, such as the one provided with this equipment, or one in
compliance with your national regulations. This HP V
Linux Workstation is disconnected from the power by removing
the power cord from the power outlet. This means the HP
V Linux Workstation must be located close to a power
ISUALIZE
outlet that is easily accessible.
Chapter 1
Connecting the Power Cords
Workstation
Power
Grounded Outlet
ISUALIZE
9