WARNING
How to Install Accessories In Your HP Visualize Linux Workstation
Removing and Replacing the Cover
For your safety, never remove the HP V
Workstation's cover without first removing the power cord from
the power outlet, and any connection to a telecommunications
network. Always replace the cover on the HP V
Workstation before switching it on again.
Removing the Cover
1. Switch off the display and computer.
2. Disconnect all power cables and any telecommunications cables.
3. If necessary, unlock the cover using the key on the back panel.
4. Lift the two latches on the front sides of the computer upwards.
5. Grasp the cover on the sides at the back of the computer and slide it
forwards and off the computer.
Chapter 2
Removing and Replacing the Cover
ISUALIZE
ISUALIZE
Linux
Linux
17