If Your Hp Visualize Linux Workstation Does Not Start Properly; Display Is Blank And There Are No Error Messages - HP XL Class 500/550MHz User Manual

Check External
Items
Check Internal
Items
Troubleshooting Your HP Visualize Linux Workstation

If Your HP Visualize Linux Workstation Does Not Start Properly

If Your HP V
ISUALIZE
Not Start Properly

Display is Blank and There Are No Error Messages

If your display is blank and there are no error messages when you turn
on your HP V
ISUALIZE
1. Check the LCD screen (refer to "Using HP MaxiLife to Diagnose
Problems").
2. Check external items.
3. Check internal items.
Be sure the following external items are functioning properly:
• Check that the computer and display are turned on. (The power light
should be illuminated.)
• Check the display's contrast and brightness settings.
• Make sure that all cables and power cords are firmly plugged in.
• Make sure the power outlet is working.
If the HP V
ISUALIZE
follow this procedure to check the internal items:
1. Turn off the display, the computer, and all external devices.
2. Unplug all power cords and cables, noting their positions. Disconnect
the HP V
ISUALIZE
network.
3. Remove the cover and check the following items:
LCD Error
Messages
Check all internal cables
28
Linux Workstation Does
Linux Workstation, follow this procedure:
Linux Workstation still does not start properly,
Linux Workstation from any telecommunications
Action Reference
Ensure they are correctly
attached and firmly in place.
Chapter 3