HP XL Class 500/550MHz User Manual page 40

System Info.
Boot Steps
Diags
Troubleshooting Your HP Visualize Linux Workstation
Using HP MaxiLife to Diagnose Problems
System information is displayed on the LCD one screen at a time and
should detail the following:
• Bios version
• Number & speed of processors
• Number and capacity of memory modules installed
• Serial Number
To view these details, use the
information screens.
Where available, the Boot steps option will display all POST steps the
next time your HP V
support purposes, POST steps are shown as POST codes and displayed
on the LCD as follows:
If your HP V
ISUALIZE
selected, the LCD displays a second menu. To perform the diagnostics
tests, select Power on from this menu to enable the hardware
management chip to assess the status of your system's components.
If your HP V
ISUALIZE
diagnostic tests will be performed as soon as you select Diags from the
LCD's main menu.
To view the test results for each system component, press the
control button.
26
button to scroll through the
Linux Workstation is powered on. For
ISUALIZE
HP KAYAK XU
POST Code 24
Linux Workstation is powered off when Diags is
Linux Workstation is already powered on, the
Post steps will be
displayed on the LCD the
next time your
workstation is powered
on.
Chapter 3