Using Hp Maxilife To Diagnose Problems - HP Kayak XU04 Supplementary Manual

Pre-Boot Checks
Error!
No CPU 1
Check that processor is
correctly installed in socket 1.
Error!
Power CPU 2
Check installation of VRM 1.
Error!
Power supply
Check power supply and
power cable connections.
2 Troubleshooting Your HP PC Workstation

Using HP MaxiLife to Diagnose Problems

Using HP MaxiLife to Diagnose Problems
Your HP LCD can help you to diagnose problems with your PC
Workstation, even when you are unable to get your system and monitor
working properly.
When you press your PC Workstation's on/off button, HP MaxiLife will
check your system before it initiates the start-up sequence. You will see
one of the following screens on the LCD as these checks progress:
Error!
CPU Socket
Check that either a processor
or terminator is installed in the
processor slots.
Error!
Power Cache
Ensure that VRM is correctly
installed in VRM 2 socket.
Error!
Power
Check that configuration of
VRMs and terminators is correct
or that the power supply is
properly connected.
28 English
Error!
Power CPU 1
Check installation of VRM 1.
Error!
Board PLL
Check system board.
Error!
RAM type
Check that RAM types
installed are compatible.
HP KAYAK XU
No errors occurred during pre-boot.
POST is initiated.
Error!
No RAM
Check memory installation.
Error!
No Video
Check that graphics card is
installed correctly.
Error!
BIOS
Flash new BIOS or start system
using crisis switch (system board
switch 10).