HP XL Class 500/550MHz User Manual page 43

If Your HP Visualize Linux Workstation Does Not Start Properly
LCD Error
Messages
Power CPU 1 Check that the processors and
Power CPU 2 VRMs are correctly installed.
Power Cache
CPU error Reset the workstation or
power-off the LAN.
No RAM, Check that the memory
RAM type modules are correctly installed.
Check that accessory boards
are firmly seated in their slots.
Verify that any switches and
jumpers on the accessory board
are properly set.
Check that the switches on the
system board are properly set.
Temp disk, Temp Check fans and that air flow
CPU Temp IO slot guide is not blocked.
Fan CPU, Fan disk Check that fans are installed
Fan IO slot correctly.
Power supply Check that power supply is
properly connected.
Power Check that power supply is
properly connected, and that
terminators and VRMs are
properly installed.
No video Check that the video card is
properly installed.
Chapter 3
Troubleshooting Your HP Visualize Linux Workstation
Action Reference
Refer to "Installing a
Processor" in the Upgrade and
Configuration Guide.
Refer to "The MaxiLife
Control Panel" in Chapter 1
Refer to "Installing Memory" in
the Upgrade and Configuration
Guide.
Refer to "Installing Accessory
Boards" in the Upgrade and
Configuration Guide.
Refer to the manuals that came
with each board.
Refer to "System Board
Switches in the Upgrade and
Configuration Guide.
Refer to "Installing a
Processor" in the Upgrade and
Configuration Guide.
Refer to the manual that came
with the video card.
29