Using Hp Maxilife To Diagnose Problems - HP Kayak XA-s02 User Manual

geron.bk : geron-3.fb4 Page 71 Sunday, March 22, 1998 5:03 AM
Pre-Boot Checks
Note: Some error
messages displayed here
may not be available.

Using HP MaxiLife to Diagnose Problems

Your HP LCD can help you to diagnose problems with your PC
Workstation, even when you are unable to get your system and monitor
working properly.
When you press your PC Workstation's on/off button, HP MaxiLife will
check your system before it initiates the start-up sequence. You will see
one of the following screens on the LCD as these checks progress:
Error!
CPU Socket
Check that a CPU or terminator Check power supply and
is installed in the CPU slots power cable connections.
Error!
Power CPU 2
Check processor 2 VRM Check system board.
installation.
Error!
No RAM
Check memory installation.
HP KAYAK XA-s
No errors occurred during pre-
boot. POST is initiated.
3 Troubleshooting Your PC Workstation
Using HP MaxiLife to Diagnose Problems
Error!
Power supply
Check processor 1 VRM
installation.
Error!
Board PLL
Flash new BIOS.
Error!
RAM type
Check that graphics card
Check that RAM types
is installed correctly.
installed are compatible.
Error!
Power CPU 1
Error!
BIOS
Error!
No Video
English 71