Using Hp Maxilife To Diagnose Problems - HP Kayak XA-s 02xx Troubleshooting Manual

Pre-Boot Checks
Note: Some error
messages displayed here
may not be available.
HP Kayak XA-s 02xx PC Workstation - Troubleshooting Your HP Desktop PC Workstation

Using HP MaxiLife to Diagnose Problems

Using HP MaxiLife to Diagnose Problems
Your HP LCD can help you to diagnose problems with your PC
Workstation, even when you are unable to get your system and monitor
working properly.
When you press your PC Workstation's on/off button, HP MaxiLife will
check your system before it initiates the start-up sequence. You will see
one of the following screens on the LCD as these checks progress:
Error!
CPU Socket
Check that a CPU or terminator
is installed in the CPU slots.
Error!
Power CPU 2
Check processor 2 VRM
installation.
Error!
BIOS
Flash new BIOS or start
system using crisis switch
(system board switch 10).
Error!
RAM type
Check that RAM types
installed are compatible.
2 English
Error!
Power supply
Check power supply and
power cable connections.
E r r o r !
C P U S o c k e t
Check that configuration of
VRMs and terminators is
correct or that the power
supply is properly connected.
Error!
No Video
Check that graphics card
is installed correctly.
HP KAYAK XA-s
No errors occurred during pre-
boot. POST is initiated.
Error!
Power CPU 1
Check processor 1 VRM
installation.
Error!
Board PLL
Check system board.
Error!
No RAM
Check memory installation.